2021 LAUNCH X431 PROS MINI

Launch X431 Pro Mini Bluetooth is a stylish Android-based vehicle trouble diagnostic tool. It inherits from LAUNCH’s advanced diagnosing technology and is characterized by covering a wide range of vehicles, featuring powerful functions, and providing precise test result.

What upgrades did we make for the new 2021 LAUNCH X431 PROS MINI?


    The Online Coding: LAUNCH X431 PROS MINI 3.0 would open a door for you to pass through and receive the OE data especially for coding. *Please Note: Only support Mercedes-Benz, BMW, VW, Porsche, Skoda, Seat, etc.
    Power Balance: LAUNCH X431 PROS MINI 3.0 would help you tuning the ignition time or injection time to balance the power which outputs from each cylinder so as to provide you with a stable, smooth RPM while driving. *Please Note: Only support Chrysler, GM, Ford.
    Component Matching: After changing the components in specific systems, you might need to conduct a matching process to ensure the components do their job, such as steering angle matching, ignition coil matching, Clutch Matching, etc. X431 PROS MINI 3.0 would do its job to make them calibrate correctly. *Please Note: Only support Volkswagen, Audi, Seat, Skoda, BMW, Chrysler, GM, Ford, Opel, Mazda, Fiat, Honda, Nissan, Hyundai, Kia, Subaru.
    Air Suspension Matching: After tuning or changing the venerable air suspension, you might need to conduct a matching process to make sure the suspension is working properly. *Please Note: Only support AUDI, BMW, CITROEN, CHRYSLER, FORD, GM, MERCEDES-BENZ, SEAT, SKODA, VW, SGM, etc.
    Injector Calibration: To gain more power or improve fuel economy, tuning the injector is the easiest way to meet your requirements. X431 PROS MINI 3.0 would match the injectors with ECU after cleaning or changing the injectors. *Please Note: Only support ACURA, AUDI, BMW, CITROEN, CHRYSLER, JEEP, DODGE, FORD, FIAT, GM, HONDA, HYUNDAI, INFINITI, LANDROVER, LEXUS, etc.
    Door and Window Initialization: After changing the central lock, window lift motors, or control units, you could connect the ECU with certain component through the X431 PROS MINI 3.0. *Please Note: Only support ACURA, BMW, MINI, CITROEN, PEUGEOT, FORD, GM, HONDA, JAGUAR, LANDROVER, NISSAN, INFINITI, OPEL, VAUXHALL, VOLVO.
    Seat Matching / Sunroof Initialization / AFS Reset / EGR Adaptation / GEARBOX Reset / SUNROOF / SUS Reset
    Transmission Control Module Calibration
    Basic Functions & Maintenance Services: For all models (chassis) till 2020. Some models for 2020.
    Personalization : For BMW/Porsche/Toyota/Subaru
    Programmable Module Installation: For Ford/Mazda
    Offline Coding: for Benz/BMW
    Online Calibration : For Volkswagen/Audi/Skoda/Seat.etc
    Online Account Login Service: For Volkswagen/Audi/Skoda/Seat.etc

 

 

 Launch Mini Pro Language:
English, French, Spanish, German, Russian, Japanese, Portuguese, Korean, Italian, Polish, Dutch, Hungarian, Finnish, Simplified, Czech, Turkish, Greek, Arabic, Danish Persian, Romanian, Serbian, Swedish, Chinese Traditional,



Supported car list as following: 

X-431 PRO MINI whole set: X-431 PRO MINI is mainly composed of an X-431 PRO MINI handset, and a DBSCar II VCI module.

 

Launch x431 pro mini Diagnostic Tool
1 VCI module
2 Reset hole
3 Rear camera
4 Camera flash
5 Slot for VCI module For housing the VCI module.
6 POWER/Screen lock key In Off mode, press it to turn X-431 PRO MINI on; In On mode, turn X-431 PRO MINI off with long press or lock screen with short press.
7 Carry strap
8 Air intake vent
9 USB/Charging port To connect to the power adaptor for charging.
10 Microphone
11 LCD screen
12 VOLUME +/- Key  To adjust the volume. To print the screen, hold and press the POWER and VOLUME – key until a snapshot pops up on the screen.
The captured snapshot is saved in the “Screenshots” folder.
13 Speaker
14 Front camera
15 Earphone Jack

X-431 PRO MINI Technical Parameters:
Operating system: Android 5.1
Processor :Quad core 1.3 GHz
Memory: 2GB
Storage:16GB
LCD screen: 6.9 inch with a resolution of 1280 x 720 pixels
Camera :Front-facing 2MP camera + rear-facing 5MP camera
Battery :3.7V/3000mh rechargeable polymer lithium battery
Connectivity : Wi-Fi: WLAN 802.11b/g/n ，Bluetooth: Bluetooth 4.1
Working temperature: 0℃ ~ 45℃
Storage temperature: -10℃ ~ 50℃

VCI module:
Working voltage 9 ~18V
Average working current About 85mA
Standby current About 55mA
Working temperature -10℃ ~ 55℃
Storage temperature -20℃ ~ 70℃
Relative humidity 20% ~ 90%

DBScarIII adapter parameters:
The brand-new DBScarIII adapter is small size and can be easily plugged into the handset to diagnose and matching, it tests car models stably, it supports
CAN diagnosis also USB data transfer.
Size: 69 × 40 × 18 mm
Operating voltage: 9V DC - 18V DC
Test voltage: DC12V
Typical power consumption: ≤2W
Bluetooth distance: 100 m
Connectivity: Bluetooth + wired
Operating temperature: -10℃to 50℃
Red Indicator: Turns red when connected to power supply;
blue Indicator: Turns blue then wireless Bluetooth work;
USB work: Turns green when the connector is connected to the USB cable

Launch X431 Pro MINI Obd2 Scan Tool Package Includes:
1pc x X-431 PRO MINI tablet
1pc x Password envelope
1pc x VCI module (For connecting OBD II vehicles)
1pc x OBD II extension cable
1pc x OBD I adaptor (For connecting the non-16pin diagnostic connector and the
VCI module)
1pc x Battery clamps cable
1pc x Power adaptors
1pc x Non-16pin connectors (For connecting non-OBD II vehicle)